logo

Technical Papers

Contact Us

Technical Papers

View Application Notes Based on Common Questions Received from Customers

Force Deflection Analysis

In packaging test, it is very important to do Force / Deflection test, the bad packing deflection may cause damage of the products. VENZO 800 series vibration controller provides Force / Deflection function, which scales the recorded acceleration to Force and computes & analysis the position change (deflection) relative to the accelerometer mounting.


The vibration reliability test for motorcycle motor  

According to the purpose of vibration test to divide the vibration tests into following types, environmental adaptability test, dynamic strength test, dynamic characteristics test and other purpose vibration test.


How to implement SRS test without data measured

Analysis of the shock time history as a digital sequence can be performed using the Shock Response Spectra (SRS). This paper will emphasize on the condition that measured data not available, according to MIL-STD 810G, then for Procedure I – Functional Shock, and Procedure V - Crash Hazard Shock Test, employ the applicable SRS spectrum from Figure 1 as the test spectrum for each axis, provided Te of the test shock time history falls between the values in the accompanying Table 1.


Phase Tracking in RSTD  

The purpose of Resonance Search, track and dell test is usually for fatigue and durability test, it always can find and test the weakest frequency point of test unit, the dwell methods include locked frequency, locked phase, peak amplitude tracking and phase tracking. The latter three methods frequency will be varied during the tracking and dwelling phase, since as we know the resonant frequency is true decreasing during dwelling period, while phase is not, so these three methods maybe better in catching with the resonance point. This paper will analyze results between fixed frequency dwell and phase tracking dwell, emphasizing on phase tracking and introduce how to do this test with VENZO controller VibExpert software.


Why adopt multivariable control

As we all know, before doing vibration testing, we should edit the reference spectrum with the vibration controller, usually low frequencies with constant displacement spectrum, middle frequencies with constant velocity spectrum, while the high frequencies with constant acceleration spectrum. This method has some relationships with vibration control algorithm; on the other hand, we can study the amplitude conversion relationship among acceleration-speed-displacement to understand the principle.


Sine-on-Sine Testing Reduces Time of Durability Testing  

Sine-on-Sine vibration testing is multi-frequency sine testing, which allows multiple sine tones simultaneously excited in the same testing. This method has become much more popular since a consortium of German automobile manufacturers like BMW approved the use of multiple simultaneous swept sine tones to reduce the time and cost of durability testing.


A Guide to Mechanical Impedance and Structural Response Techniques

In recent years there has been a rapidly developing interest in the field of mechanical dynamics for a variety of reasons. Firstly, the development of stronger materials and greater economy in design has led to increasingly lighter structures, more prone to vibration problems. At the same time, increasing rotational speeds also give increasing likelihood of having to deal with structural resonances.


What is vibration

Vibration is a mechanical phenomenon whereby oscillations occur about an equilibrium point. The oscillations may be periodic such as the motion of a pendulum or random such as the movement of a tire on a gravel road.


What is Resonance

In physics, resonance is the tendency of a system to oscillate with greater amplitude at some frequencies than at others. Frequencies at which the response amplitude is a relative maximum are known as the system's resonant frequencies, or resonance frequencies. At these frequencies, even small periodic driving forces can produce large amplitude oscillations, because the system stores vibrational energy.


Product
Vibration Controller
MIMO Vibration Controller
Shock Test System
Small Shakers
Sensors
Transducer Calibration System
Resoures
Catalog
Technical Papers
Application Videos
FAQ
Software Updates
Newsroom
News
Exhibition
Contact information

Rm. 19C, Lockhart Ctr.,301-307 Lockhart Rd., Wan Chai, Hong Kong.

Tel: 86-571-88194486

sales@dtc-solutions.com

Copyright © DynaTronic Corporation (China) Ltd. All Rights Reserved.