logo

Product

VENZO 820 Vibration Controller

VENZO 820 Vibration Controller

Rear Panel: connectors include 2/8 Analog Input Channels, a Drive Channel, a100 BASE-T Network Port, an AUX channel (only for VENZO 880, can be adjusted to 2-axis drive control channel), a grounding-end, an External Emergency Abort Jack and a terminal block of digital I/O lines.

Product Details

VENZO 820 Shaker Control System

820.png 

State-of-the-art Hardware

· 1~2 Analog input channels

· 1 Drive Channel

· 450MHz DSP Processing

· 100 Mbps Ethernet port connecting to PC (without grounding problem)

· -30~70℃Working Temperature

· No-fans structure to reduce the background noise

· 160 dB / Octave Anti- aliasing Filter

· 1 AUX Channel

· 24-bit ADC/DAC, 130dB dynamic range

· 204.8 kHz Sampling Rate, 40kHz Frequency Range

· 1GB Internal Flash Memory Stores Test Configuration

· Floating Ground Design Reduces Ground Loop Problems

Classical Control Functions

· Sine

· Random

· Resonance Search and Tracked Dwell

· Classical Shock

 

Analysis Capabilities and Auxiliary Functions

· THD Detection

· Data Recorder

· FFT Analysis

· SRS Analysis

· FRF

· Waterfall View

· Signal Calculation

· Signal Cache

· Signal Editor

· Word/PDF Test Report

· Email Report

· Off-line view

· Transient Capture, Force/Deflection Analysis, Shock Response Analysis

· Working Temperature: -30~70℃

· Humidity: 5%~95% RH

· Consumption: 10W (VENZO 820), 20W (VENZO 880)

· Power: 100~240VAC(50~60Hz)

· Enclosure Rating: IP43

· PC Connection: high-speed standard Ethernet interface

· Anti-vibration Performance: 10-60 Hz @ 0.15 mm peak;60-150 Hz @ 2 gn, conform to IEC 60068-2-6;

· Anti-impact Performance: 10 gn for 16 ms,conform to IEC 60068-2-27

· In Accordance with EMC Standards: EN61326-1:2006, EN61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008

· Safty: EN 61010-1:2001

· Compliance: CE Marking



Hardware Specifications

· Input: 1~2 channels

· Input Interface: BNC Connector

· Input Resolution24-bit ADC

· Coupling: AC Gnd, AC Dif, DC Gnd, DC Dif, Charge, IEPE

· TEDS: IEEE 1451.4 compliant, automatic-reading

· Anti-aliasing Filteranalog and digital anti-aliasing low-pass filters

· Input Dynamic Range135dB

· SNR: > 100dB

· Input VoltageRanges ±10, ±1 or ±0.1 VPEAK

· Input Impedance: 1MΩ(Single-ended)2MΩ(differential)

· Maximum Input: ± 36VPEAK without damage

· Input Channel Crosstalk: <-100dB@1kHz

· Amplitude Channel Match: 0.1 dB

· Channel Phase Matchbetter than ±1.0 degree, up to 20 kHz

· Input Signal Type: Charge, Voltage, High-integrated

· Input / Output Channel Crosstalk<-100dB

· Total Harmonic Distortion<-100dB

· Frequency Accurancy: as fine as 0.000001Hz

 

 

· Output:1 Drive Channel

· 1 AUX Channel: can be configured as drive channel in dual-axis control

· Output Interface: BNC Connector

· Output Resolution: 24-bit DAC

· Max. Sampling Rate: 204.8kHz

· Frequency Range: 80kHz

· Dynamic Range: ≥108dB

· Output Voltage Range: 10V F.S

· Max Output Current: 20 mA

· Total Harmonic Distortion<-100dB@1kHz

· PC Configuration: Windows XP/Vista/ 7 /8 Operating System and an Ethernet port.

· Microsoft Word / Excel and PDF are recommended.

图片4.png 

Main Classis

· Dimension (mm): 290*210*60 (VENZO 820); 390*280*60 (VENZO 880); 430*280*60 (VENZO 8160)

· Weight: 2.6 kg (VENZO 820), 4.2 kg (VENZO 880), 5.0 kg (VENZO 8160)

· Front-end Panelthree LED lights indicate the status of "Power", "Ready" and "Control". The red Abort button is for emergency stop of the vibration test system.

· Rear Panel: connectors include 2/8 Analog Input Channels, a Drive Channel, a100 BASE-T Network Port, an AUX channel (only for VENZO 880, can be adjusted to 2-axis drive control channel), a grounding-end, an External Emergency Abort Jack and a terminal block of digital I/O lines.



Related Products

Inquiry

Product
Vibration Controller
MIMO Vibration Controller
Shock Test System
Small Shakers
Sensors
Transducer Calibration System
Resoures
Catalog
Technical Papers
Application Videos
FAQ
Software Updates
Newsroom
News
Exhibition
Contact information

Rm. 19C, Lockhart Ctr.,301-307 Lockhart Rd., Wan Chai, Hong Kong.

Tel: 86-571-88194486

sales@dtc-solutions.com

Copyright © DynaTronic Corporation (China) Ltd. All Rights Reserved.